Make life easy and control your site remotely!
A versatile board allowing you to monitor the battery, set alarms (i.e. door alarm), switch hardware or relays (on/off) and reduce crashback.
Ideal for high site repeaters with limited access
Features and Benefits
Unique Identity Code - Each board has its own identity code
Relays – the ability to control the site remotely by switching items on/off using the relays. The default 'power on' state of the relays can be set to on or off.
Acknowledgement – the ability to receive confirmation via Morse code (3 wpm) that the changes have been implemented.
Sub Audio – Filters out all signal below 300htz eg. CTCSS
Audio Level Adjustment - for equalizing audio levels between radios
Test Inputs – Allows for remote testing of selected input devices. Eg monitoring of door switches. The ability to set an alarm notification if a door is opened or closed on site, it will then transmit hourly that code until the alarm is acknowledged
Crash back suppression - Reduces the amount of crash backs heard over the radio network. If multiple repeaters are used this filter reduces the crash back by 1 for each repeater it is used on.
Analogue Voltage sensor - senses 0-24 volts. Requested remotely using DTMF tones and returns a numerical value in morse code.
Linking Control - Remotely switch off the linking between two radios
Link Masking - In the event of a radio loosing power, the board will mask the busy signal from that radio, therefore preventing the system from locking up